Category Archives: Uncategorized

Great websites to buy BFT Mitto online in United Kingdom / USA / Australia!

Many thanks to growing web, online shopping has never been so easy and useful to us shoppers. It will save you great time and money purchasing something not only available in UK / USA / Australia, but also around the world.

I just found some great places to buy BFT mitto 2 remote online in UK / USA / Australia, which will save you BIG money!

PLACE. The following website is built by BFT Mitto 2 remote compatible factory sellers in China, if you need more than 10pcs batch purchase, this is a great place to go! since it has MUCH lower price than any resellers around the world by factory-direct wholesale strategy.

http://www.solidremote.com/

Be sure to check above link out, they also have huge collection of other compatible remotes such as Ditec, Merlin, B&D and Liftmaster etc, all great deals.

The above two are places I have encountered online and bought from, all very good! recommended every time!

Buy BFT Mitto 2 remotes online – start today.

BFT Mitto 2 compatible remote programming on YouTube

Sometimes pure text can be boring, that’s why we have video programming guide of BFT Mitto 2 compatible remote – the ultimate low cost compatible replacement solution.

Solidremote SR-B1 is fully compatible with BFT MITTO 2M / MITTO 4M / TRC / RCB02 garage door remotes, suitable for most BFT roll up, sliding doors and slide / swing gates as well as all other current BFT radio automations.

The above YouTube video is recorded using our BFT Mitto 2 compatible remote SR-B1 and original BFT CLONIX V1.05 receiver board.

Watch dozens of different brands video programming guide online at our YouTube channel – http://www.youtube.com/solidremote

How to program your new BFT mitto – using remote learning

Sometimes when we live in a block or program the remotes to gate instead of garages, we just can’t access to receiver and press learn button in it in normal way, or you just feel it too bothersome to open the receiver case, but don’t worry as BFT Mitto / RCB02 has a brilliant feature called remote programming – just follow the below methods and your problem solved.

Using this method you do not need to have direct access to the control panel or receiver. However, you do need at least one original or compatible BFT MITTO transmitter that is already coded into the opener and DIP1 is in ON position ( very important to make this method work ). Make sure to install the battery in the transmitter correctly.

1. Press hidden key on the transmitter already memorised.
2. Press any key on the transmitter already memorised, which is also to be attributed to the new transmitter.
3. Within 10 seconds, press hidden key – lower two buttons ( on our SR-B1 compatible ) or upper two buttons ( on original BFT Mitto ) on the new transmitter to be memorised.
4. Press any key to be attributed to the new transmitter.
5. To memorise another transmitter, repeat the procedure from step 3 within a maximum time of 10 seconds, otherwise the receiver exits the programming mode.
6. To copy another key, repeat from step 1, having waited for the receiver to exit the programming mode or after disconnecting the receiver from the power supply.
7. Press the transmitter button to test operation.

Note: Maximum protection from storage of foreign codes is obtained by having the DIP1 OFF and programming in MANUAL mode or by means of the universal palmtop programmer.

Official manual on how to program your new BFT mitto remotes to garage gate receiver

Program your new BFT mitto remotes to Gate / Garage Door Openers the same way as original MITTO remotes, please refer to your receiver’s user manual. For a typical BFT CLONIX1-2 standalone receiver, the programming procedure is as follows. Make sure to install the battery in the transmitter correctly.

1. If you wish the transmitter to activate output 1, press push button SW1, otherwise press push button SW2 to activate output 2.
2. If you wish to obtain functions other than monostable activation, refer to receiver manual table A – output activation.
3. When LED DL1 starts blinking, press lower two buttons ( on our SR-B1 compatible ) or upper two buttons ( on original BFT Mitto ) simultaneously on the transmitter, LED DL1 will remain continuously lit.
4. Press the key of the transmitter to be memorized, LED DL1 will flash quickly to indicate that it has been memorized successfully. Flashing as normal will then be resumed.
5. To memorize another transmitter, repeat steps 3 and 4.
6. To exit memorizing mode, wait for the LED to go off completely or press the key of a remote control that has just been memorized.
7. Press the transmitter button to test operation.

Note: To remove a single transmitter’s code from the receiver memory please refer to your receiver manual.

If you have other questions, please refer to your hardcopy manual along with your garage or gate opener.